300mm Clock by IanP – Zortrax Library

0
2460
2
58

Download Project

License: Creative Commons - Public Domain Dedication

Printed on
Zortrax M300
Used materials
ABS HIPS ULTRAT
Designed in
Inventor
Tags
clock

IanP Australia

Contact Me

About

User hasn't filled out personal information.

More by IanP

Show all projects from IanP

The main face is printed on a M300 with the first part of the print in White Z-HIPZS and paused just as the numbers start to print and changed the filament to Black Z-HIPS.

The outer rim is also printed in Black Z-HIPS

I printed the second hand in Red ABS and the Hour and Minute hands in Black Ultrat on the M200

I used a 285mm disc of 2mm perspex for the clear face.

I used a common Quartz Clock Movement and I glued the longer second hand to the supplied second hand

	Last Update	Type	Downloads	Size
Clock-Face-3.stl	01 October 2016	.stl	47	2,17 MB
Clock-face-3-Hour-Hand.stl	01 October 2016	.stl	46	682,5 KB
Clock-face-3-Minute-Hand.stl	01 October 2016	.stl	46	866,49 KB
Clock-Face-3-outer-rim.stl	01 October 2016	.stl	46	432,89 KB
clock-face-3-second-hand-3.stl	01 October 2016	.stl	46	928,7 KB

		Last Update	Type	Downloads	Size

2 Comments

Member

jrtech

| 8 years 11 days ago

Hello,
I printed this model with the M300.
But, shrinkage occurred from the side.
Did you have a problem? What should I do?
Thanks.

Hide Replies ∧

Author

IanP

| 8 years 11 days ago

I did not have any shrinkage, I printed in Z-Hips with 0.14 Layer, quality Fine, Normal Seem, infill HIGH, support 45 and support lite, Auto Fan, 5 and 5 layers and Smart Bridge.
I do run my printers in a temperature controlled room at 25 deg C

Hide Replies ∧