ACETONE Polish Dome Base
by IanP 28 August 2016 in Zortrax Parts
Report abuse
by IanP 28 August 2016 in Zortrax Parts
Base for a 400 day glass dome clock to use the dome as a enclosure for acetone polishing of ABS.
This base has a fan and a LED light.
| Last Update | Type | Downloads | Size | |||
|---|---|---|---|---|---|---|
|
|
Dome-Part-Holder.stl | 28 August 2016 |
.stl | 99 | 2,16 MB | |
|
|
Glass-Dome-Base-Part-B-2.stl | 28 August 2016 |
.stl | 99 | 1,92 MB | |
|
|
Glass-Dome-internal-Part-A.stl | 28 August 2016 |
.stl | 99 | 3,46 MB | |
|
|
Glass-Dome-Under-Base-Part-C-green.stl | 28 August 2016 |
.stl | 99 | 4,33 MB | |
4 Comments
You must be logged in to post a comment.
You must be logged in to post a comment.
Isn’t it dangerous to put components inside which could ignite the acetone vapor?
Yes it is dangerous to put spark emitting devices into acetone vapor, the LED light is sealed and very little chance of producing a spark and the fan motor is a brush less fan so it also has very little chance of producing a spark, The switch and the LED power supply are in a compartment below and sealed from vapor and the switch is only switching very low currant so there is very little chance of it producing a spark anyway.
I have two different glass domes, they both fit
138mm inside and 142mm outside diameter
134mm inside and 140 outside diameter
What are the dimensions of the glass dome? Specifically the base diameter.
Inventure Print Head Screw Driver
by IanPConnector holder
by IanPPower Supply Mount
by IanP12v Power plug cover
by IanPDust Extractor Adapter
by IanP
by IanPAdd this project to collection