M200V4_FilamentGuide and protector

by naka sanli 21 October 2016 in Zortrax Parts

Report abuse

  • 4

  • 5744

  • 1

  • 451

License: BSD License

M200V4_FilamentGuide and protector

Designed In : Autodesk 123D Design
width(X) : 75mm
depth(Y) : 67mm
height(Z) : 134.2mm

Instructions
Printed On : Zortrax M200 V4
Z-Suite : v1.7.0

Print Settings
Material(Filament) : Z-ABS
Layer Thickness(Resolution) : 0.19 mm
QUALITY : MEDIUM
Infill : MAXIMUM
Support Angle : 20 deg
Fan Speed : AUTO

Estimated print time : 4h39m
Filament usage : 18.19m(43g)

1 Comment


  • Profile photo of JuanCallon
    Member
    JuanCallon 
    | 6 years 9 months ago

    Thanks!

    wpDiscuz
    SpoolHolderSlim
     
    0

    SpoolHolderSlim

    by naka sanli
     
     
    Views 2828
     
     
    Comments 0
     
     
    Downloads 299
     
    glassesStand_4.stl
     
    0

    glassesStand_4.stl

    by naka sanli
     
     
    Views 2177
     
     
    Comments 0
     
     
    Downloads 39
     
    sanli_FilamentAlarm.stl
     
    4

    sanli_FilamentAlarm.stl

    by naka sanli
     
     
    Views 3802
     
     
    Comments 0
     
     
    Downloads 20
     
    M200V4_FilamentGuide and protector
     
    4

    M200V4_FilamentGuide and protector

    by naka sanli
     
     
    Views 5744
     
     
    Comments 1
     
     
    Downloads 451
     
    PhoneStand_74x34kojiro2.stl
     
    13

    PhoneStand_74x34kojiro2.stl

    by naka sanli
     
     
    Views 4899
     
     
    Comments 0
     
     
    Downloads 645
     
    FilamentSpoolBridge2.stl
     
    4

    FilamentSpoolBridge2.stl

    by naka sanli
     
     
    Views 4531
     
     
    Comments 0
     
     
    Downloads 419