Poloh Emergency Tag – Embedded Money and Note

Resolution: Medium Setting [Default]
Raft: No
Support: No

Step 1: Take a banknote and a piece of paper that contains some important information [e.g. contact numbers, residential address and medical information]. Fold the banknote horizontally 3 times and vertically once.

Step 2: Fold the money and piece of paper together and wrap it up in some tape. The tape is to make sure that my nephews don't know that there is money inside the tag. They only know that there is important information inside and they should snap it in an emergency.

Step 3: Start the print, as soon as it gets to 90% watch it carefully. The printer will start to lay some unsupported layers, as soon as this happens, select the change filament option. This will momentarily stop the print, place the wrapped-up money inside the print and resume the build. The money and note are now embedded inside the tag. The unsupported area might seem unnecessary but it plays an important role in ensuring that the tag is sealed properly.

Step 4: Remove the excess material from the print. The print is now done and you can hook it on a key ring or on a school backpack.

The tag's contents are accessed by snapping it. My nephews are young so it's thin enough for them to snap. I chose not to tell them that there is money inside the tag because they or their friends might get tempted to use the money for some other purpose.

Alternative Uses:

[1] Store a memory card [Micro SD] that contains the holder's details [more information can be stored than on a piece of paper].
[2] Store a pet owner's contact details and put them on the collar.
[3] Store some personal backup money on your key chain, just in case you lose your wallet or bank cards [especially when you are out of the house].
[4] Store a spare key for kids [when the tag is placed inside a school backpack]. The current design is too small for most house keys and I'll as a bigger one.