SDI Camera Mount
by IanP 29 February 2016 in Household Objects
Report abuse
by IanP 29 February 2016 in Household Objects
This is a mount to fit a SDI Camera that allows for setting vertical and horizontal view adjustments with 2 fixings.
The printed mount has built in pivot pins between the inner frame and the outer fixing frame so the bolts are not required but I have allowed for M3 nuts to fit into the inner frame and 10mm long M3 countersink bolts to go through from the outer fame through the pivot pin so that you are able to clamp the 2 frames rigid once the camera direction is set. I have replaced the two M3 screws that came with the camera with the same 10mm M3 screws as I used in the pivot to fasten the camera into the inner frame.
| Last Update | Type | Downloads | Size | |||
|---|---|---|---|---|---|---|
|
|
SDI-Camera-Mount.stl | 29 February 2016 |
.stl | 9 | 2,49 MB | |
Be the First to Comment!
You must be logged in to post a comment.
You must be logged in to post a comment.
Inventure Print Head Screw Driver
by IanPConnector holder
by IanPPower Supply Mount
by IanP12v Power plug cover
by IanPDust Extractor Adapter
by IanP
by IanPAdd this project to collection