V8 Engine by NIXA by NIXA – Zortrax Library

17
14418
3
675

Download Project

License: Creative Commons - Attribution

Printed on
Zortrax M200
Used materials
ABS
Designed in
Fusion 360
Tags
AutomotivecarCrankshafteducationenginemodelnixapistonshafttoyv8

NIXA POLAND

Contact Me

About

NIXA 3D Prints&Design PL/ENG for more information please contact us : nixapolska@gmail.com www.facebook.com/NIXApolska

More by NIXA

Show all projects from NIXA

V8’s are powerfull and big motor units. Now it is the time when you can print and put your own one on your desk. Our model is an interesting and educational toy. Fully moving mechanism allows you to learn the construction and how the the engine works. The model would also work as a gadget or a simple toy to discharge the stress. Enjoy!

Model was printed with following parameters:
-Material: Z-ABS
-Layer: 0.19mm (we recomend layer lower than 0,2mm)
-Infill: LIGHT
-Support: 30 degrees

List of parts:

3D Printed parts:
-1x Block
-1x Block_2
-1x Clutch
-1x Fan
-8x Connecting_Rod
-8x Piston
-8x Shaft

Other parts:

-18x M3x10 DIN912 Screw
-4x M3x20 DIN912 Screw

Assembly Instructions:

Connect Pistons with the Connecting Rods, then place that parts in the Block of engine. To make engine working, assemble Crank Shaft step by step starting from the fan, and then connect all 8 Shafts together like on the one of the pictures. You might fold back a little bit the Connecting Rods to attach them to the Shafts. Offset of the further canks should be ie. 90 degrees. Connection of the Block and Block_2 should provide smooth rotation and movement of all the parts.

	Last Update	Type	Downloads	Size
Block.stl	02 July 2016	.stl	659	451,55 KB
Block_2.stl	02 July 2016	.stl	650	272,15 KB
Clutch.stl	02 July 2016	.stl	654	351,94 KB
Connecting_rod.stl	02 July 2016	.stl	650	74,89 KB
Fan.stl	02 July 2016	.stl	649	1004,96 KB
Piston.stl	02 July 2016	.stl	656	1,62 MB
Shaft.stl	02 July 2016	.stl	651	198,91 KB

		Last Update	Type	Downloads	Size

3 Comments

Member

gkol

| 7 years 3 months ago

No problem with printing and assembly. printed without supports, Layer 0,19mm (only shafts printed in 0,14mm). Almost no cleanup after removing from printing bed. Turns smooth and easy.

Hide Replies ∧