Vacuum Catch Pot
by IanP 15 November 2016 in Engineering
Report abuse
by IanP 15 November 2016 in Engineering
Vacuum Catch Pot used in the resin infusion process of composite materials.
I place a disposable fast food container inside the catch pot to hold some resin if it does get to the pot, this is easy to remove and dispose off. I use inline fuel filters on the top of the pot to catch any stray fibers from getting to my vacuum pump. The inlet to the pot I use a common garden irrigation adapter from 13mm to 19mm. I have o rings on the pot cap to fit the inside of the 19mm fitting.
I use 13mm irrigation hose from my part to the vacuum pot. The lid and the base have grooves for where the middile fits and I use 150mm ID o ring to seal.
| Last Update | Type | Downloads | Size | |||
|---|---|---|---|---|---|---|
|
|
Vacuum-Pot-Base-2.stl | 15 November 2016 |
.stl | 47 | 2,97 MB | |
|
|
Vacuum-Pot-centre.stl | 15 November 2016 |
.stl | 47 | 2,58 MB | |
|
|
vacuum-pot-top-2F-1I.stl | 15 November 2016 |
.stl | 48 | 4,69 MB | |
Be the First to Comment!
You must be logged in to post a comment.
You must be logged in to post a comment.
Inventure Print Head Screw Driver
by IanPConnector holder
by IanPPower Supply Mount
by IanP12v Power plug cover
by IanPDust Extractor Adapter
by IanP
by IanPAdd this project to collection