300-Piece Miniature of Injection Molding Machine _ Part Orange by luckys photos

3
2712
0
79

Download Project

License: Creative Commons - Attribution

Printed on
Zortrax M200
Used materials
ABS Glass-like HIPS ULTRAT
Tags
modeling

luckys photos Italy

Contact Me

About

User hasn't filled out personal information.

More by luckys photos

Show all projects from luckys photos

The project for final assembly consists of more than 300 parts,
3d modeling was made with no parametric software 3D,with about 800 hours of modeling,
scale 1:36,with overall dimensions of 370 mm x 166 mm x h 155 mm.
The final prints made in groups of objects, this did not allow to obtain the maximum quality of some pieces.

The 3d printer suitable for modeling should use other technology,
But with a little ‘patience and practicality, with a wire 3d printer (in this case with Zortrax m200, it used by many professionals in the field)ì
they can produce a lot of items, until recently unthinkable to be realized at low cost.

Part orange

Printing hours 215 hours.
For the assembly it was also used the support of screws 2 MA,
and for centering of almost all the details have been inserted into the pins of 1.2 mm steel.
The prints were not performed special finishes.
Materials used ultrat-z, z-abs, z-glass for the supporting base, for a total of about 1100 g.
Before the final prints have been made of the study of prints to find the correct dimensional values
to be applied to the joints, the minimum thickness and to the holes of the pins (about 200 hours of prints).

	Last Update	Type	Downloads	Size
31.stl	14 November 2016	.stl	79	9,36 MB
39.stl	14 November 2016	.stl	78	5,92 MB
62.stl	14 November 2016	.stl	78	1,54 MB
check_particolari_pressa.pdf	14 November 2016	.pdf	91	117,92 KB