Jonction-P

To build your own Jonction-P furniture, using the provided model, you will need 17mmx17mm (18x18) wood sticks. Here, we used the affordable pine wood available at this dimension in our local hardware store, Leroy Merlin. First, sketch the dimensions of the furniture you want to make and cut the wood sticks accordingly. You need four wood parts and four connectors to complete a frame. To fill this frame, you\\\\\\\'ll need to cut a wooden surface out of PLYWOOD. To get a better looking result, cut the edges and the corners at 45 degrees, the plank will fit perfectly in the frame's hole.

You need 16 wood screws to fix a frame and 4 smaller ones to fix the Plywood. Screw tight, otherwise the structure will be weak. Repeat for the needed amount of surfaces. Tip : the more boards, your shelf has, the strongest it will be.

Once done, slide the furniture's legs at the wanted height and screw on place with the remaining holes in the Jonction-P connector.

Take a look at the video to help you : https://youtu.be/B27DtYzJGWE

If you want to use a different type of wood section, download the parametric file and customize the dimensions of the original sketch. The model will adjust to this new information.

If the final structure lack strength, do not hesitate to use the connector's remaining holes to screw the furniture to the wall. Also, the remaining holes can be used to attach metal cables to create a X at the back of the structure, giving it a better triangulation. I also provided a small plastic part (Contreventement) that can be used to assemble several Jonction-P modules together.

Be creative!

Sincerely,

-Sam