Mini Drill Stand By NIXA by NIXA

15
11089
1
436

Download Project

License: Creative Commons - Attribution

Printed on
Zortrax M200
Used materials
ABS Aluminum
Designed in
Fusion 360
Tags
aluDremelmultinixaprofilestandtool

NIXA POLAND

Contact Me

About

NIXA 3D Prints&Design PL/ENG for more information please contact us : nixapolska@gmail.com www.facebook.com/NIXApolska

More by NIXA

Show all projects from NIXA

The stand for a mini drill designed by Nixa enables precise drilling because of the stable structure. If You place the drill in the right place of the stand, You can avoid the unwanted damages which can be result of trembling hands and receive assurance that the drill holes will be exactly at the scheduled place. If DIY is Your hobby, test our new gadget!

Model was printed with following parameters:
-Material: Z-ABS
-Layer: 0.29mm
-Infill: SOLID ( Important!! : 2_Base.stl part should be print with FULL infill to provide right stiffness !!)
-Support: 20 degrees, but most of the parts don’t require any support
Highly recommended using side covers.

1. Prepare all of the parts. Assemble dremel following the sketches available in the gallery. Use screws adequate to the hole depth. Central carriage with rest of the parts should be tightened with M3x50 mm screws. That screws are also axis of the Main Wheels with Bearings. 3D printed parts should be connected to alu proflile by Nut Holder. Base could be attached to your Desk by 2x M8 screws , 2x Desk Holder and 2x Tightener, but you can get more stiffness by attaching it with 4 M8 screws nd regular M8 nut ( this option require drilling holes in your work desk). Flexible Strap provide return carriage with the multitool to the home position. Wheels are asembled with 2x Bearing and 1x Hub of Wheel per one wheel ( see picture in the gallery)

2.List of Parts:

3d Printed parts:
- 1x 1_Central_Carriage
- 1x 2_Base
- 1x 3_Platform
- 1x 4_Bar
- 1x 5_Arm
- 1x 6_Left_Gear
- 1x 7_Right_Gear
- 1x 8_Lever
- 1x 9_Up_Holder
- 1x 10_Down_Holder
- 1x 11_Strap_Holder
- 2x 12_Tightener
- 4x 13_Nut_Holder
- 2x 14_Desk_Holder
- 4x 15_Hub_Of_Wheels

Other parts:
- Dremel ( should be compatible with many of the multitools available in the market, we tested only MacAllister MSRT 130)
- 30x30 Alu Profile ie. Bosch Rexroth or ARMA ( 300mm length)
- 8x 623zz Bearings
- M3x12 DIN912 Screws
- M3x16 DIN912 Screws
- M3x20DIN912 Screws
- M3x25 DIN912 Screws
- M3x50 DIN912 Screws
- M3 hexagonal nut
- M5x30 DIN912 Screw (to connect left and right gear, and to attach Strap Holder and Base to the Alu profile)
- M5 hexagonal nut
- M8x100 DIN933 Screw (to attach to the desk)
- M8 hexagonal nut

	Last Update	Type	Downloads	Size
1_Central_Carriage.stl	03 August 2016	.stl	399	308,87 KB
2_Base.stl	03 August 2016	.stl	395	195,39 KB
3_Platform.stl	03 August 2016	.stl	402	116,49 KB
4_Bar.stl	03 August 2016	.stl	396	253,79 KB
5_Arm.stl	03 August 2016	.stl	393	173,62 KB
6_Left_Gear.stl	03 August 2016	.stl	394	156,92 KB
7_Right_Gear.stl	03 August 2016	.stl	395	150,38 KB
8_Lever.stl	03 August 2016	.stl	394	118,73 KB
9_Up_Holder.stl	03 August 2016	.stl	396	188,17 KB
10_Down_Holder.stl	03 August 2016	.stl	397	159,46 KB
11_Strap_Holder.stl	03 August 2016	.stl	396	140,61 KB
12_Tightener.stl	03 August 2016	.stl	394	759,75 KB
13_Nut_Holder.stl	03 August 2016	.stl	394	61,41 KB
14_Desk_Holder.stl	03 August 2016	.stl	394	62,48 KB
15_Hub_Of_Wheels.stl	03 August 2016	.stl	399	471,37 KB