Bathroom accessories, complete professional set (not toys)
HERE 2 TEST FILES and Soapdish holder “single”
ALL FILES HERE: https://www.redpah.com/product/4084/
– Double robe hook
– Towel bar 35 cm/14 inch (for printers with at least 30×30 cm of area)
– Soapdish holder
– Toilet brush holder (diameter 70 mm, 2.75 inch)
– Toilet paper holder – Vertical
– Toilet paper holder – Horizontal
– Toothbrushs holder
– Oral-B Toothbrushs holder
The elements can be fixed to the wall with 2 screws and the special rear recess allows the use of silicone or double-sided adhesive tape without seeing anything.
A small cover (the same for all the elements) allows to hide the screws and can be easily removed in case of need.
With acetone vapors or “XTC-3D resin” you can get a beautiful shiny industrial appearance and no one will say that you printed it in your home.
The production is optimized thanks to “Ring_Support” and “Glass_Container”, parts used to compose different elements (see under).
Toothbrushs Holder: Ring_Support + Glass_Container + Toothbrushs_Cover
Oral-B Toothbrushs Holder: Ring_Support + Glass_Container + OralB_Cover + OralB_Container
Soapdish holder. : RingSupport + Soapdish_Element
Toilet brush holder: Ring_Support + Glass_Container
Tips for printing:
To make everything more resistant, tilt the elements to be printed at 45°-50°, so there will be filaments that will better connect the hook to the fixed part on the wall (the .stl files are already set).