Updated Base part for the ‘M300 spool holder for M200spool’ project by adwecs.
** For full assembly you will also need the M300SPholder-barV2 part from adwecs’ project, see link below**
adwecs’ project allows you to mount the 1kg spools that come with the M200 onto an M300 printer. It works very well!
Since this project was uploaded however, the cutout shape at the back of the M300 has changed. This project is an update on the Base part which will fit the new version of the M300 (Feb 2017).
adwecs’ original project https://library.zortrax.com/project/m300-spool-holder-for-m200spool/
Recommended to print back side down, 180 degrees around X or Y from position shown.